Buff and Blend Disc 8″ (Single Ply)

(1 customer review)

$21.00

In stock

SKU: SBB8X1/2-1P-HSMED Categories: , ,

Description

Buff and Blend Disc 8″ (Single Ply)

This type of Buff/Blend in single ply blue is made of a tightly woven material. Not to be confused with less dense materials sold in stores. The disc measures 1/2″ in thickness in single ply application.  Sold in single ply but can be used in 2 ply application. 2 ply application will require arbor extension for most models of buffers/grinders. When used in 2 ply application it will stiffen up and create an even more abrasive surface.

BUFF AND BLEND USES:

The blue disc is often the second step in heavy oxidation removal. It is best to use a green buff/blend disc first. It should be followed up with either this single ply or Fibretech Surface Prep Discs (2 ply glued). Followed by the Satin airway to lift the heavy removal lines.  This product works great for removing heavy oxidation/pitting in a shorter amount of time. Here at Evan’s Detailing and Polishing we use them to remove concrete off of aluminum wheels. In addition, they can be used to remove years of acid or chemical burns in one short application. Disc is a high strength buff and blend material used in heavy removal of product. To achieve that show shine from a heavily oxidized piece of aluminum it will take time and multiple steps. But the Buff/Blend High Strength discs will cut down your sanding and prep time before polishing.

Pro tips:

If you are looking for a Show quality finish out of your heavily oxidized aluminum consider purchasing the 3 step kit. Also if looking for a higher strength cut check out the Buff and Blend High Strength/ Heavy Cut Green 8″ Disc. Comparatively, wanting a lighter strength calls for the Satin Airway. Furthermore you could use sandpaper to sand even further to achieve that Show Shine finish. Our recommendation in achieving the show shine finish is as follows: 3 Step Buff/Blend High Strength green, Blue, then Satin Airway. Followed by the 320-400-600 grits of sandpaper. To finish use the 2 step metal polish kit to polish to perfection.

Evan’s Detailing and Polishing Approved Buffers:

Makita 9927C (3500 RPM Variable): https://amzn.to/2TaKL8n

Dewalt DWP849X (3500 RPM Variable): https://amzn.to/2qIZ7j9

**For how to videos, look up Evan Steger on YouTube. For photos of his incredibly shiny achievements, or just some down-to-earth advice, look up metalpolisher3826 on Instagram OR Evan’s Detailing and Polishing on Facebook. He is very responsive to emails: evan@goshineon.com and also has his phone readily available: (920) 979-0386.**

1 review for Buff and Blend Disc 8″ (Single Ply)

  1. Casey Houser (verified owner)

    Disc works great! A real time saver!

Add a review

Your email address will not be published. Required fields are marked *

Share This